Reinforcement from Steel Bars
- Bending and Cutting Machines
In close cooperation with Schilt Engineering www.schiltbv.nl CPT offers a wide range of bending and cutting machines for steel bars Ø 6-50mm
Solutions are available in manual, semi-automatic or full automatic executions.
SE 90-150 Hydraulic Cutting Machine
A strong and robust machine that quickly cuts the measured lengths of steel bars.
| SE90 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cutting capacity (with tensile strength up to 850N / mm²) | |||||||||||
| Bar-diameter (mm) | Ø6 | Ø8 | Ø10 | Ø12 | 14 | 16 | Ø20 | Ø25 | Ø28 | Ø32 | Ø40 |
| Max number of bars per. cut at 450N / mm² | 45 | 25 | 18 | 12 | 9 | 7 | 4 | 3 | 2 | 2 | 1 |
| Max number of bars per. cut at 850N / mm² | 30 | 16 | 10 | 8 | 6 | 5 | 3 | 2 | 1 | 1 | - |
| SE150 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cutting capacity (with tensile strength up to 850N / mm²) | |||||||||||||
| Bar-diameter (mm) | Ø6 | Ø8 | Ø10 | Ø12 | 14 | 16 | Ø20 | Ø25 | Ø28 | Ø32 | Ø40 | Ø45 | Ø50 |
| Max number of bars per. cut at 450N / mm² | 60 | 50 | 40 | 28 | 20 | 14 | 9 | 6 | 4 | 3 | 2 | 1 | 1 |
| Max number of bars per. cut at 850N / mm² | 60 | 32 | 28 | 14 | 12 | 8 | 6 | 4 | 3 | 2 | 1 | 1 | - |
We are Ready to Assist you
SBS 30 - SBS40/SBC40- SBS60/SBC60 Bending Machine
This bending machine is easy and simple to operate, maintain, clean and service.
The machine is available with a simple 3-angle control or with an automatic control, including bending programs, angle correction and touch screen.
| Technical specifications | SBS 30 | |||
|---|---|---|---|---|
| Bending capacity | Single bend (450N / mm²) | Single bend (650N / mm²) | Single bend (850N / mm²) | |
| Quantity | Bar | Bar | Bar | |
| 6x | Ø10 mm | Ø10 mm | Ø10 mm | |
| 4x | Ø14 mm | Ø12 mm | Ø12 mm | |
| 3x | Ø20 mm | Ø18 mm | Ø14 mm | |
| 2x | Ø25 mm | Ø22 mm | Ø20 mm | |
| 1x | Ø32 mm | Ø28 mm | Ø25 mm | |
| Control | Manually | Manually | Manually | |
| Drive | Electric | Electric | Electric |
| Technical specifications | SBS 40 / SBC 40 | |||
|---|---|---|---|---|
| Bending capacity | Single bend (450N / mm²) | Single bend (650N / mm²) | Single bend (850N / mm²) | |
| Quantity | Bar | Bar | Bar | |
| 6x | Ø16 mm | Ø16 mm | Ø16 mm | |
| 4x | Ø25 mm | Ø25 mm | Ø20 mm | |
| 3x | Ø28 mm | Ø25 mm | Ø24 mm | |
| 2x | Ø32 mm | Ø28 mm | Ø25 mm | |
| 1x | Ø40 mm | Ø38 mm | Ø32 mm | |
| Control | SBS 40 Manual / SBC 40 automatically | SBS 40 Manual / SBC 40 automatically | SBS 40 Manual / SBC 40 automatically | |
| Drive | Electric | Electric | Electric |
| Technical specifications | SBS 60 / SBC 60 | |||
|---|---|---|---|---|
| Bending capacity | Single bend (450N / mm²) | Single bend (650N / mm²) | Single bend (850N / mm²) | |
| Quantity | Bar | Bar | Bar | |
| 8x | Ø12 mm | Ø12 mm | Ø12 mm | |
| 5x | Ø20 mm | Ø20 mm | Ø20 mm | |
| 3x | Ø35 mm | Ø32 mm | Ø28 mm | |
| 2x | Ø40 mm | Ø35 mm | Ø32 mm | |
| 1x | Ø60 mm | Ø50 mm | Ø40 mm | |
| Control | SBS 60 Manual / SBC 60 automatically | SBS 60 Manual / SBC 60 automatically | SBS 60 Manual / SBC 60 automatically | |
| Drive | Electric | Electric | Electric |
Flexbar-MR / Flexbar-DAE Stocking and Cutting System for Steel Bars
Both the Flexbar-MR and the DAE systems can be sujpplied in semi-automatic or fully automatic executions for stocking and cutting steel bars. The systems are delivered with 3 or 6 storage racks with ejector system, automatic feeding, measuring and cutting of the steel, respectively. After cutting, the steel bars are fed to the project box or directly to the single or double bending machine.
Multibar ABL Barloader, Automatic Storing and Cutting system for Rod Steel
A high-capacity multibar automatic rod steel system in combination with the ABL rod steel storage system - including an automatic charging system, in which the delivered rod steel is driven into the shelf by an automatic crane.
We Provide Optimization Proposals
CPT - your Shortcut to Increased Efficiency!
